Product Overview
LOOPEZ - Pet Securing System using the existing holes in your truck bed. CAUTION: Read these and prior cautions before using this product. While this one is specifically designed for Dodge & Chevy Truck Beds, the clips provided will allow it to be used in any truck with anchors of the appropriate size and location. While this product was designed for pets, it can also be used to secure cargo.
1) Safe working capacity is 1/3 of the break strength. For this product, 100lbs. is the safe working capacity.
2) DO NOT exceed safe working capacity.
3) DO NOT use for towing, lifting, or personal restraint.
4) This product was designed for pets.
5) LOOPEZ is not responsible for pet's collar/secure strap, short strap from breaks or being disconnected.
6) THE LOOPEZ PET SECURE SYSTEM IS NOT TO BE USED FOR LIVESTOCK RESTRAINT!
7) Inspect hardware regularly for signs of wear. Replace product if damaged, cut, bent or worn.
WARNING! The attachment of this product is critical and beyond the control of LOOPEZ Inc. LOOPEZ Inc. is NOT responsible for the attachment or the installation or the use of our fasting system and secure strap. It neither guarantees, nor will it be liable for any damage or loss resulting from their attachment or improper use. The liability of this product is limited to its purchase price if it proves to be defective in material and/or workmanship. Warranty information is available upon request. LOOPEZ Inc. is not responsible for the installation nor the use of: such hardware as and in the scope of: stretch cords, ratchet, motorcycle straps, or rope type attachments.
Serious personal injury can result from failure to follow these instructions:
1) Wear protective gear when installing and using LOOPEZ Pet Secure Systems.
2) Keep out of reach of children.
3) Install LOOPEZ Pet Secure Systems carefully as per instructions.
4) Not all pets can be tethered effectively. Owner supervision and judgment are required.
5) Pets known to be aggressive in nature should not be left unattended while on secure system.
6) Always remember to provide fresh water for your pet.
LOOPEZ Pet Securing System Instructions
CAUTION: Read these and prior cautions before using this product.
1) Select proper style and size LOOPEZ restraint unit. 3/4" or 7/8" to fit into holes to be used. If no holes are provided, you may drill appropriate holes in desired location.
2) Make sure to have plastic bell (on the end of the eye-bolt) just past the flaring-plug and insert into desired holes, making sure flaring-plug fits flush with surrounding surface. With thumb and finger, hold flaring-plug flush to surface and pull eye-bolt out as you turn eye-bolt in the clockwise direction until snug fit and plug is tight.
3) LOOPEZ Pet Secure Strap System with swivel snap-clips may be used on vehicles that come standard with cleats or welded D-rings (when no holes are provided).
4) The LOOPEZ Pet Secure lock-down/fasteners with eye-bolts are now ready to be attached to the adjustable width strap with D-ring in center of strap for attaching to pet collar (designed to fit most truck bed sizes) with the swivel snap-clips.
5) Adjust secure strap to fit snug between fasteners and cam-buckle.
6) Attach short collar strap between D-ring and pet's collar to desired length as to let pet move, but not to allow going over bed walls and hanging by the collar.
7) Attention: this short strap is owner's responsibility, and is not provided by LOOPEZ.
8) To release the LOOPEZ Pet Secure lock-down/fasteners: Remove secure strap by releasing cam-buckle and loosen strap to allow swivel snap-clips to be removed from eye-bolts. Place thumb and finger on flaring plug and turn eye-bolt in counter-clockwise direction until it stops. Push eye-bolt and pull flaring plug with flange away from mounting surface.
9) Check lock-down/fasteners and secure strap, as well as short strap and collar every 25-30 miles and adjust as needed.
10) KNOW THE LAW IN YOUR STATE: Many states require you to secure your pet in your vehicle.
