Product Overview
Secure your load using the existing holes in your truck with the LOOPEZ Anchoring System Inserts! Fits most Ford Trucks.
LOOPEZ Anchoring System Inserts - CAUTION: Read these and prior cautions before using this product.
1) Select proper style and size LOOPEZ fastening unit. 5/8", 3/4", 7/8" at present to fit into hole to be used.
2) Make sure to have plastic bell (on the end of eye-bolt) just past the flaring-plug and insert into desired hole, making sure flaring-plug fits flush with surrounding surface. With thumb and finger, hold flaring-plug flush to surface and pull eye-bolt as you turn eye-bolt in the clockwise direction until achieving a snug fit and plug is tight.
3) The LOOPEZ lock-down/fastener is now ready to be used to attach your desired holding hardware, such as: stretch cords, ratchet, motorcycle straps, or rope-type hold-downs.
4) To release the LOOPEZ lock-down/fastener unit: Remove stretch cords, ratchet, motorcycle straps, or rope types hold-downs used in conjunction with the LOOPEZ lock-down/fastening system. Place thumb and finger on flaring plug and turn eye-bolt in counter-clockwise direction until it stops. Push eye-bolt in and pull flaring plug with flange away from mounting surface.
5) Check lock-down/fastener every 25 - 30 miles and adjust as needed.
6) LOOPEZ lock-down/fastening systems are especially designed to be used with "S-hook" and "J-hook" tie-down hardware.
LOOPEZ Anchoring System Instructions. CAUTION: Read these and prior cautions before using this product.
1) Safe working capacity is 1/3 of the break strength. For this product, 350lbs. is the safe working capacity.
2) DO NOT exceed safe working capacity.
3) DO NOT use for towing, lifting, or personal restraint.
4) Inspect hardware regularly for signs of wear. Replace product if damaged, cut, or worn.
WARNING! The attachment of this product is critical and beyond the control of LOOPEZ Inc. LOOPEZ Inc. is NOT responsible for the attachment nor the installation nor the use of our fastening system. It neither guarantees, nor will it be liable for any damage resulting from their attachment or improper use. The liability of this product is limited to its purchase price if it proves to be defective in material and/or workmanship. Warranty void if product is damaged, cut, or worn. Warning information available upon request. LOOPEZ Inc. is NOT responsible for the installation nor the use of: such hardware as and in the scope of: stretch cords, ratchet, motorcycle straps, or rope type hold-downs.
SERIOUS PERSONAL INJURY CAN RESULT FROM FAILURE TO FOLLOW THESE INSTRUCTIONS:
1) Wear protective eyewear such as safety glasses when using LOOPEZ tie down system along with stretch cords, ratchet, motorcycle straps, or rope type hold-downs used in conduction with the LOOPEZ fastening system.
2) Keep out of reach of children.
3) Secure LOOPEZ tie-downs/fastener carefully as per instructions.
